Types of fence panels: lap, lattice-top, slatted and metal
Written by Matt W on 17th Nov 2026.
Choose lap, lattice-top, slatted or metal panels.
Each Rowlinson listing contains 3 matching panels.
Telluria has a ten-year anti-perforation warranty.
Products and prices checked 17 November 2026.
The main types of fence panels are lap, lattice-top, slatted and metal. Lap panels use overlapping boards, while lattice tops let light through. Rowlinson timber panels come in packs of 3. The Traditional Lap is 1830mm wide and 1830mm high. Telluria steel panels are sold individually, with heights of 1680mm or 2000mm. Compare designs, actual dimensions and pack quantities before choosing.
Key takeaways
- Lap panels use overlapping horizontal boards and are usually the lowest-cost choice.
- Grosvenor has a curved lattice top; Halkin has a straight lattice top.
- Langham has horizontal slats with open bar detailing and measures 1800 x 1800 x 40mm.
- Telluria panels have double-walled galvanised steel and an anthracite grey powder-coated finish.
- The Telluria 6H panel is 2000mm high, exactly England's 2 metre planning limit away from highways.
Buyer's note from Matt W: I compare the actual millimetre dimensions before the nominal feet measurements. I also check whether the listing price covers a pack or an individual panel. For a complete fence run, I count the posts as well as the panels. Post sizes vary, so I check the chosen posts before calculating the run.
- Matt W, Fencing Stores
What are the main types of fence panels?
The main fence panel types are lap, lattice-top, slatted and metal. Their construction affects their appearance, the light passing through and the maintenance involved.
Lap panels have overlapping horizontal boards. Lattice-top panels combine a timber panel with decorative lattice above. Slatted panels have spaced horizontal slats for a more contemporary look.
Metal panels avoid timber treatment. The Telluria range uses double-walled galvanised steel rather than timber boards.
Start with the appearance you want, then compare dimensions and quantities. A nominal 6' x 6' label does not mean every panel has identical millimetre measurements.
The Traditional Lap measures 1830mm square. Grosvenor and Langham 6' x 6' panels measure 1800mm wide and 1800mm high.
What is a lap fence panel?
A lap fence panel has horizontal boards that overlap each other. It is also called an overlap panel and is usually the lowest-cost choice.
The Rowlinson Traditional Lap has traditional overlapping waney-edge boards. Each panel is 1830mm wide and 1830mm high.
The timber is pressure treated for protection against rot and insect attack. This listing contains 3 matching panels, with additional matching panels and matching fence posts available as options.
We recommend comparing lap fence panels first if cost guides your choice. Choose lattice-top or slatted designs if you prefer decorative openings.
Matt's pick: 6' x 6' Grosvenor Fence Panel - 3 Panel Pack
Best for: A full-height decorative boundary with a curved lattice top.
Why we rate it: Each pressure-treated panel measures 1800 x 1800 x 40mm. The curved top has decorative lattice infill.
Price: £416
What are lattice-top fence panels for?
Lattice-top fence panels let light through their upper section and give climbing plants support. They are decorative fence panels with openings above the main timber section.
Grosvenor has a curved top with decorative lattice infill. Halkin has a straight top with decorative lattice infill. Choose Grosvenor for a curved outline or Halkin for a straight upper edge.
Grosvenor comes in heights of 1200mm, 1500mm and 1800mm. All three sizes are 1800mm wide and 40mm deep.
Halkin comes in heights of 1200mm and 1500mm. Both sizes are 1800mm wide and 40mm deep.
Both ranges are pressure treated and sold in packs of 3 matching panels. Compare the top shape and actual height together before ordering.
What does a slatted fence panel look like?
A slatted fence panel has spaced horizontal slats for a contemporary look. The spaces let some air and light through.
The Rowlinson Langham has horizontal slats with open bar detailing. Each panel measures 1800mm wide, 1800mm high and 40mm deep.
Langham is pressure treated and sold in a pack of 3 matching panels. Additional matching panels and matching fence posts are available as listing options.
Choose Langham if you prefer horizontal lines to overlapping boards or a lattice top. Compare its open detailing with the other designs before deciding.
Are metal fence panels better than timber?
Telluria metal fence panels need no routine painting, while the Rowlinson timber panels are pressure treated. The better choice depends on your preferred material, appearance and maintenance requirements.
Telluria panels are made in Belgium from double-walled galvanised steel. Their anthracite grey powder-coated surface is low maintenance. They have a ten-year anti-perforation warranty.
No warranty term is stated for the Rowlinson timber panels. Pressure treatment and a stated warranty are different details, so compare them separately.
The Telluria 5H measures 1800 x 1680 x 47mm. The 6H measures 1800 x 2000 x 47mm. Both are sold as single panels, with compatible Telluria components available on the listing.
Browse metal fencing if avoiding routine painting is a priority. For access, compare garden gates alongside your chosen panels.
The Telluria Door 5H gate measures 870mm wide, 1680mm high and 50mm deep.
Which fence panel type should you choose?
Choose lap for cost, lattice-top for decorative openings, slatted for horizontal lines, or Telluria for no routine painting. Compare the actual panel dimensions before calculating your fence run.
The table lists width x height x depth where all three measurements are stated. Rowlinson prices cover 3-panel packs; Telluria prices cover single panels.
| Panel | Type | Size per panel (mm) | Material and finish | Sold as | Price |
|---|---|---|---|---|---|
| Traditional Lap 6x6 | Overlap | 1830 wide x 1830 high | Pressure-treated timber | 3-panel pack | £233 |
| Grosvenor 6x6, Matt's pick | Curved lattice-top | 1800 x 1800 x 40 | Pressure-treated timber | 3-panel pack | £416 |
| Halkin 6x5 | Straight lattice-top | 1800 x 1500 x 40 | Pressure-treated timber | 3-panel pack | £352 |
| Langham 6x6 | Slatted | 1800 x 1800 x 40 | Pressure-treated timber | 3-panel pack | £332 |
| Telluria Fence 5H | Metal | 1800 x 1680 x 47 | Galvanised steel, anthracite grey powder-coated finish | Single panel | £294 |
| Telluria Fence 6H | Metal | 1800 x 2000 x 47 | Galvanised steel, anthracite grey powder-coated finish | Single panel | £313 |
"Our range gives buyers a choice of pressure-treated timber designs and powder-coated steel panels. I compare dimensions and pack quantities alongside appearance because Rowlinson packs and Telluria single panels cover different amounts."
- Matt W, Fencing Stores
Standard mainland supplier delivery is included with the Rowlinson timber packs. Fence panels sit between posts, so your fence run needs both. Post sizes vary, and panel widths alone do not give the complete run length.
In England, planning permission is unnecessary within the stated height limits, provided the exceptions do not apply. The limit is 1 metre beside a highway used by vehicles, or its footpath. It is 2 metres elsewhere, measured from ground level.
An existing fence above these limits must not be made higher. These rights exclude listed houses and their curtilage, plus boundaries with neighbouring listed buildings. They also exclude properties where an article 4 direction or planning condition removes the rights. In conservation areas, permission may be needed to take down a fence.
Watch out: a 2000mm panel reaches the limit. The Telluria 6H is already at the 2 metre limit before anything raises it. Check gravel boards, raised ground and post caps above the panel against the limit measured from ground level. Check the applicable planning restrictions before ordering.
Frequently asked questions
Which fence panels are usually cheapest?
Lap fence panels are usually the lowest-cost choice. Compare pack quantities before comparing prices. Rowlinson listings contain 3 matching panels.
Are all 6' x 6' fence panels the same size?
No, nominal 6' x 6' panels can have different millimetre dimensions. Traditional Lap measures 1830 x 1830mm. Grosvenor and Langham measure 1800 x 1800 x 40mm.
What is the difference between Grosvenor and Halkin?
Grosvenor has a curved lattice top; Halkin has a straight lattice top. Both are pressure-treated timber panels. Their lattice sections let light through and give climbing plants support.
Do slatted fence panels let air through?
Yes, spaced horizontal slats let some air and light through. The Langham panel has horizontal slats with open bar detailing. Each panel is 1800mm wide and 1800mm high.
Do Telluria metal fence panels need painting?
Telluria's powder-coated surface needs no routine painting. The panels have an anthracite grey finish and double-walled galvanised steel construction. Their warranty covers anti-perforation for ten years.
Are posts included in the Rowlinson panel packs?
Matching fence posts are offered as options on the listings. Each standard pack contains 3 matching panels. Check your chosen post sizes when calculating the fence run.
Related articles
Sources checked
- Planning Portal: fences, gates and garden walls, England guidance checked 17 November 2026.
- Fencing Stores product listings for Rowlinson and Telluria fencing, checked 17 November 2026.