Skip to main content

Fence Posts

Fence posts support the entire boundary, so they must suit the panel, finished height and ground conditions. Choose from timber, slotted concrete or compatible metal posts. Decorative panels may also need a smoother post finish than traditional lap fencing.

A 2400mm post used with a 1800mm panel leaves 600mm below ground before gravel boards or clearance are considered. Gate, corner and exposed end posts can carry greater loads. Plan those positions before calculating intermediate posts and fixings.

Allow 600mm Typical depth for 1.8m panels
Match Panels Check slots and fixings
Ground Conditions Choose suitable foundations
Strengthen Ends Plan gates and corners

Choosing fence posts

Match the post material, section and length to the chosen panels. Taller, heavier or wind-exposed fencing generally needs stronger supports and carefully designed foundations.

Allow for buried depth

Post length must cover the finished fence height and the section below ground. Never select a post using panel height alone.

Corners, ends and gates

End posts and corners can carry different loads from intermediate posts. Gate posts must also support the gate weight and repeated movement.

Frequently asked questions

What length fence post do I need?

It depends on fence height and foundation depth. Include the full below-ground section.

How far apart should fence posts be?

Spacing follows the panel or board system. Include any required clearance and fixing details.

Are gate posts different?

Gate posts often need greater strength. Size them for the gate weight and opening.

Can I mix post and panel systems?

Only use components confirmed as compatible. Dimensions and fixing positions can differ between systems.

Do fence posts need caps?

Post caps reduce direct water exposure on timber end grain. Choose the correct post size.

Need help planning?

Call our team free on 0800 098 8877.