Skip to main content

Fence Panels

Our fence panels include Rowlinson decorative timber panels and Telluria Fence 5H and Fence 6H metal garden panels. Choose timber or metal to suit your garden boundary and its style.

Rowlinson timber panels come in several sizes. When fitting panels, we recommend checking finished panel dimensions before setting post positions. See our metal fencing category for Telluria panels.

Timber Panels Decorative garden designs
Metal Panels Telluria fencing
Panel Sizes Measurements on product pages
Boundary Planning Check panels before setting posts
Brand:

About our timber fence panels

Our current Rowlinson timber fence panels are supplied in packs of three, which is the minimum order quantity. Extra panels and matching posts can be selected below on each product page. Styles range from traditional waney-edge lap fencing to lattice tops, horizontal slats and open-bar detailing.

The traditional lap panels measure 1830mm wide by 1830mm high. Grosvenor and Halkin panels use 40mm framing and measure 1800mm wide. Available heights include 1200mm, 1500mm and 1800mm. The Langham panel has a 70mm by 40mm frame and stands 1800mm high. Composite fencing and metal fencing provide lower-maintenance alternatives. See garden gates for a matching entrance.

Why we chose this range

"Panel width matters more than the familiar six-foot label. Check whether the product is 1800mm or 1830mm before setting posts. I favour pressure-treated timber where the fence will face damp planting or limited airflow."

Matt W, Fencing Stores

Compare the panel styles

StyleBest suited toConstructionAvailable heights
Traditional lapPrivate boundaries and straightforward replacement runsWaney-edge boards1830mm
Grosvenor - Matt's pickPrivacy with a softer decorative top40mm frame, lattice infill and curved top1200mm, 1500mm and 1800mm
HalkinDecorative boundaries with a level top line40mm frame with lattice infill1200mm and 1500mm
LanghamContemporary horizontal screening70mm by 40mm frame with open-bar detail1800mm

Measuring tip: Measure every bay separately. Older posts are often neither square nor evenly spaced.

Matt's fitting tip: set posts from the actual panel

Use the panel width and post thickness when marking centres. Include the required fixing clearance. Do not rely on nominal six-foot dimensions.

Timber treatment and maintenance

Dip treatment colours the surface and provides initial protection. Keep dipped panels clear of soil and renew a suitable exterior treatment as required. Pressure treatment penetrates deeper into the timber and protects against rot and insect attack. Natural timber will still weather in sunlight. Check fixings, post bases and damaged end grain during an annual inspection.

Frequently asked questions

How many fence panels are included?

Every timber product includes three matching panels. Choose extra matching panels from the options on its product page.

Are the fence panels exactly six feet wide?

No, widths differ between 1800mm and 1830mm. Check the product diagram before placing posts or ordering replacement panels.

Which fence panel treatment should I choose?

Pressure treatment suits long-term outdoor exposure with less frequent retreatment. Dip-treated panels need suitable ongoing surface care.

What panel height gives more privacy?

An 1800mm panel provides the greatest screening in this range. Check local planning rules before increasing boundary height.

Can I order matching fence posts?

Yes, matching posts are available on each timber panel page. Select the quantity needed for your planned run.